Kitchen

Dryer for dishes in the lower cabinet: when it is needed, which one to choose

Dishwasher Level 2 800mm white module

LEMAX Base drying 80 cm (SS) stainless steel

Dishwasher Level 2 500mm white module

Dryer for dishes "Lemax", 2-tier, with to.

Well Max Base drying 60 cm stainless steel

Dryer "Axentia" for dishes, color: brown.

800 mm. Has holders for glasses, several departments for various utensils. Facade fastening. The product is delivered in individual packaging. Additionally: Type: co.

Drying basket in the base 800mm with drawer (dish.

Furniture accessories Boyard: reviews, advantages, where to buy

Built-in base cabinets . These are the usual direct designs, which are presented in the form of a box. It is integrated in the lower cabinet using rails. Such dryers are equipped with several compartments for various dishes. At the bottom there is a tray for collecting excess water, which must be periodically removed and washed. It is convenient to use such designs for children and people of small stature. You can install a Tip On extension system with a closer so that the dryer rolls out after a slight push on the facade. That is, pens are not required to be used here.

If you have a dishwasher installed, such a dryer will be the best solution when placed next door. It is enough to open the dishwasher, extend the compartment with the dryer, and then, without changing the position of the body, move the dishes from one container to another.

Really very comfortable and practical.

If all the dishes are stored on the upper drawers, using the lower dryers will be inconvenient. Have to constantly bend and rise. For people aged and with back problems, this option is not suitable.

I can say that lower placement has more advantages than disadvantages. Much depends on the general organization of the kitchen.

There is one more view.

Roll-out bottom dryers . They are mainly used on corner cabinets. Due to the difficult access to them, using the roll-out system is correct enough. It optimizes the interior space. Basically, these are drying mesh structures that are attached to racks or to the facades of a kitchen set. There are usually no divisions into sectors for different dishes. Basically, such drying is recommended to be used specifically for storage, and not for placing wet dishes there. This is due to the absence of pallets in most models.

So it is the first option that can rightly be considered a full-fledged and most practical dryer installed in the lower cabinet.

Materials used

Having decided on the type of structure and how to place it in the lower cabinet, it is worth considering the material.

There are many product options. But not all of them are able to withstand such operating conditions.

Dryers are of this type, depending on the material of manufacture:

How to make a bookshelf with your own hands: photos, examples of work

  • Enamelled. They look beautiful, but serve little. Due to water and mechanical influences, the enamel layer falls off, and rust begins to develop under it,
  • With a metal dusting. An analog of enameled models, only here instead of enamel steel spraying is used. In conditions of high humidity, this layer wears out quickly, rust begins to appear,
  • From stainless steel. But the stainless steel serves a very long time. The optimal choice of material for the dryer. The built-in model is usually located behind the front door, that is, there is no additional ventilation, as in open cabinets. Only stainless steel can withstand such loads,
  • Plastic. Roll-out plastic drying is not the best choice. These are the most budget models, although they are not afraid of moisture. Short-lived designs. An option for those who want to save as much as possible,
  • Tree. Even when processing with special compounds for moisture protection, use for drying dishes is not worth it. It is rather a decoration element designed to be installed in a conspicuous place.

So it turns out that among all this diversity, only stainless steel in fact is the best and only right choice for a dryer.

But the choice is still yours.

A bit about size

If we talk about standard top dryers, then here the dimensions are mainly dictated by the dimensions of the furniture. Only depth is usually considered fixed. And this is 200-300 mm. They differ in width, but obey certain standards. Again, it all depends on the width of the cabinet. As a result, the width of the dryer can be 50 cm, 60 cm, 70 or 80 cm. Models 900 mm wide are rare.

The optimal width is 60 cm or 600 mm. This is due to the fact that most kitchen cabinets have a similar depth. This is true for built-in lower cabinets and desktop models of dryers.

In the case of those built into the lower cabinet, the situation is different. The width, as in the dryers for the upper cabinets, depends on the size of the cabinet itself. But the size range is shifting in the direction of reduction. You can find dryers with a width of 400, 500 with fastening to the facade, 600 mm. It is extremely rare to come across 300 mm products.

Do not forget about custom solutions. Basically, these are dryers installed in corner cabinets, or hung on doors. They have their own size range, which is associated with the design features of the furniture. Here the pitch is 50 mm. This allows you to find models 75 cm wide with a standard depth, for example. For some, 450mm may not be enough for installation in a lower base. There is already a start from the volume of dishes that you plan to place there. Otherwise, it may turn out that there are a lot of dishes, and there is not enough space on the dryer. Hence the problems.

There is a rule. At 10 cm wide, 3 plates are placed. This allows you to place up to 12 plates on a 40 cm wide model.

Based on this rule, you can calculate approximately how many plates are used in your family, compare this with the dimensions of the cabinet where the dryer will be located, and choose the appropriate model. You can read more about varieties and materials here, I will leave a link.

Draw conclusions

The dryers built into the lower cabinets can really be the optimal solution in many situations. They provide easy access for a person of small stature. This is a good option for children, a great choice when combined with a dishwasher and in relatively spacious kitchens.

But for some cases, such drying will not work. For example, these are small kitchens. It is not a luxury to occupy a whole lower cupboard with a single dish dryer. Here preference is mainly given to desktop, hanging models, or built into upper cabinets.

Now it’s very interesting to hear your opinion. Which dryers do you prefer and why? Do you think a dishwasher in the lower cupboard is better than a tabletop or hanging design? Leave your feedback.

Subscribe, write to us in the comments, ask questions and tell your friends about our project!

Pros of Built-in Dish Dryers

The advantages of using built-in dishwasher dryers are time-tested and therefore not beyond any doubt.

The dishes are covered with facades and do not attract excessive, unwanted attention.

Regardless of whether to wipe the dishes or put them in the “dryer” immediately after washing, it will in any case be clean.

The built-in kitchen “drying” is intended not only for drying dishes directly, but also for storing them.

Drying provides the ability to easily access the right utensils. All items are stored separately from each other, which allows you to keep in the dryer not only ceramic or glass dishes, but also expensive designer clay, without fearing the quality of storage.

But there are drawbacks to using built-in dishwashers.

    The main one is the need to monitor the amount of water collected in the pan. Even if the drier tray is equipped with an automatic water drainage system, no one is safe from clogging of the drain pipe.

Water that regularly stays in the pan may cause an unpleasant odor over time, so it is recommended that the pan be washed and wiped periodically.

An ill-conceived, insufficient amount of ventilation inside the cabinet can cause premature failure of the hinges of the facade or even damage to the structural elements of the cabinet themselves.

Rules for choosing a rack dryer

Choosing a quality “dryer” is fairly straightforward. First of all, you need to decide on the choice of material from which it is made. Plastic products are quite hygienic, but they lose somewhat in aesthetics.

A plastic dryer behind a wooden facade, even veneered, looks out of place.

Enamelled metal “dryers” are somewhat cheaper than their chrome-plated counterparts, but lose in reliability and durability.

In case of accidental damage, the enamel coating begins to deteriorate quickly and form foci of rust.

Although chrome products are more expensive than other analogues, they satisfy the quality requirements.

Chromium applied to metal rods prevents contact of the metal base with moisture.

Secondly, you must very carefully determine the size of the purchased dryer. All modern models of “dryers” provide some freedom of adjustment.

Care must be taken to ensure that the item purchased fits in its dimensions to the intended installation location.

When installing a kitchen built-in “dryer”, you should follow a few simple rules. It must be possible to remove and install the pallet after the final installation of the dryer in place.

The distance between the “dryer” for plates and the shelf for cups should be at least 300 mm.

It is better to install the dryer in the middle of the cabinet, this will allow to place the utensils of the maximum size in it.

Troflexes

The simplest type of product is a grid or a small perforated board mounted on a sink.

Sink dryer

When using such devices, water from the dishes flows directly into the sink. Models are also available that can be folded into a roll, which facilitates their storage if they are not needed. They can be made of their plastic or metal.

On such a dryer you can set some dishes to dry, but for one or two people living in the house this is enough. In addition to serving items, here you can upload freshly washed products. Troflexes look pretty simple, you can choose them without much being attached to the style of the kitchen.

Tabletop

There are many models that are installed on horizontal surfaces. They can be separate modules for drying cutlery, cups or plates. Combined systems with compartments to accommodate the entire range of used dishes are more functional. Both stationary and folding products are available. Designs can be easily moved if necessary, they are easy to use - dishes are always at hand. But storage systems mounted on countertops or near sinks clutter up space. In addition, particles of dirt in the air settle on the washed dishes.

In order to save free space and create comfortable conditions for the hostess, the stationary design for drying dishes can also be integrated behind the sink.

Wall mounted

The dryer can be hung in any free place on the wall (usually on an apron) or inside the headset, not far from the sink. This method of organizing a place to store wet dishes allows you to free the work surface. However, it does not provide objects for table setting with the necessary protection from dust and dirt.

Metal constructions

The most common are metal structures. In this case, the material must undergo processing - galvanization or enamel coating. This is important when operating in high humidity.

Drying for dishes metal

Prices for metal dish dryers

Most often, stainless steel is used, which has a coating protecting it from corrosion (it is important that there are no chips and other defects). Such dryers serve for a long time, they are durable and functional. Most steel models look very stylish. But stainless steel systems are expensive. It is used in the manufacture of dryers and aluminum. A big plus - care for metal products is practically not required.

Plastic products

Plastic products are cheaper than metal (especially stainless steel). Stylish, bright interior items are made from this material. The important thing is that polymer models are completely unaffected by water, corrosion and rot. But the rest of their characteristics often leave much to be desired.

Kitchen dryer

In order to start talking about the varieties of this subject, let us first examine what it is.

Items for drying dishes are different. There are built-in closets, there are freestanding. They are classified according to many criteria.

Each such thing in the kitchen consists of completely independent departments. There are departments for storing cups, for storing dishes. Each part of this department should be made of durable material so that the dryer does not fall apart from the volume of dishes put into it to dry.

Convenient solution for the kitchen

Such saucers are divided into several types:

  • Single tierwhich are intended for salad bowls and small plates.
  • Bunk. They are designed to dry cups separately from plates.
  • Combined. On them you can dry any kitchen appliance from a ladle to large plates.

Another type of utensil is recessed. They are attached to the walls of the cabinet through plastic mounts. There are cabinets with driers for dishes, both above and below. And if the apartment has a dishwasher, then the dryer under the sink is the most convenient of all.

Creative option for dryer

The materials that are used in the manufacture of saucers are diverse. It can be ordinary plastic, which is considered the simplest. From it mainly create saucers, which are placed on the work surface. And for built-in dryers use metal from stainless alloys. Other metals are used, but they are covered with a layer of anti-corrosion coating. As a result, neither moisture, nor any other aggressive substance affects them.

Another type of material, however, already out of use, for the manufacture of dryers is wood.

This is the most expensive material. From past centuries, it is considered a sign of luxury and prosperity. In the manufacture of saucers made of wood, they are covered with a layer of moisture-proof material. Therefore, they, like metal, are not affected by water.

Dryer with convenient drain for water

And before buying any of the kitchen utensils, you need to measure the place where it will be. So that later there would be no problems. And the cup section should be on top, above the plates. Since the water from the plates after washing will drain onto the cups, if they are down and contaminate them again.

Cabinet Dryer 60 cm

Warehouses are classified by:

For example, you cannot put a dryer eighty centimeters long in a cabinet with a much smaller size. Or, conversely, a small length dryer in a large cupboard. It will at least not look aesthetically pleasing. Therefore, it is important to choose the exact size. Especially if you order a dryer to order.

What is the advantage of such dryers and small cabinets? They are compact, do not take up much space. They look pretty solid and neat.

Semicircular, convenient option

What you need to know to mount such a dryer in a cabinet? The place where this dryer will be located should be well ventilated. That is, the cabinet must have a high-quality exhaust hole. Or, you can drill two small holes on the drying side to maintain a constant flow of air. Thus, moisture and various odors will accumulate less inside. So the dishes will always be clean and tidy.

Such dryers are made mainly of metal. They are coated with an anti-corrosion layer so that the material does not rust during its use.

The kit consists of a cup dryer, for plates and a tray. Such a dryer weighs together about one kilogram. Together with plates in it, of course, gain weight. Therefore, the cabinet must be well fixed to the wall so as not to fall off the weight of the dishes that will be placed in it.

On the walls of the cabinet there must be strong fastenings: either plastic small corners, or metal pins. A saucer will be mounted on them. They should fit tightly in the cabinet openings. This is done so that under the weight of the dishes the dryer does not fall and does not break all other tableware.

Convenient storage of your dishes

In such a saucer fits up to eighteen plates. If you live in a large house where guests constantly gather, parties are organized, then it is better to choose a larger saucer, respectively, for a larger number of cutlery.

In the closet 80 cm

These dryers will already differ from those discussed above in size and weight. They are more powerful, voluminous. They are installed in standard kitchen cabinets. The capacity of these saucers is twenty-eight plates.

Option for drawer

The pallet should be removable or extendable to make it easier to wash. Those who choose large sizes for cabinets, of course, must be aware that the price will be appropriate for such saucers.

The pallet will no longer be plastic, but metal with a special coating to protect it from moisture.

If a sixty centimeter saucer can still be placed in a drawer, then eighty is unlikely to succeed. Therefore, such saucers are made only for stationary cabinets.

Modern style kitchen

Although, the current masters know everything. GWhen choosing, make sure that the dryer is made with high quality. If it is installed in a drawer, then it must be precisely sized for it so that the plates and cups do not prevent it from moving out when opening and closing.

Stainless steel

This type of dishwasher is the best purchase for those who love hygiene, aesthetics, durability, ergonomics.

Firstly, a stainless steel dryer will forever relieve you of rust after prolonged use of conventional dryers. So plastic dryers quickly break down, and metal, although not immediately, but the moisture protection layer is gradually thinning or due to mechanical stress during use.

When opening the cabinet doors, such a thing will always be pleasing to the eye, and the plates that stand in it will ideally fit into the atmosphere that the chromed product creates.

Illuminated kitchen cabinet

But their price corresponds to quality. Therefore, to buy a good device that will bring you convenience and joy all your life, it is better to choose a chrome saucer.

Pallet

The tray for drying dishes is almost always made of plastic. Since this device should be easily removed from the cabinet, wipe and not rust from moisture that gets on it when drying.

The pallets should fit the size of the container itself. You will never be sold a sixty centimeter dryer, and an eighty centimeter drip tray. Pallets should be coated with special products that protect them from mold and various fungal microorganisms.

Use drip tray

There are special pallet mats. At the same time, they serve as a crockery, a device for collecting drops from dishes. Such items are usually sold separately. They are needed as an additional device for drying glasses, cups, and other cutlery.

Varieties of dryers with sizes

Above, we figured out with built-in dryers, what sizes are suitable, for which cabinets. We learned what these items are made of. Now we’ll deal with dimensions more seriously.



The main sizes of dryers are as follows:

  • Five hundred millimeters.
  • Six hundred millimeters.
  • Seven hundred millimeters.
  • Eight hundred millimeters.

These sizes are used universally and are considered standard. These dimensions are calculated according to the width of the kitchen module. For example, if the cabinet has dimensions six hundred millimeters wide (or sixty centimeters), then accordingly the saucer will also fit into these dimensions.

Choose quality material

These are the sizes of built-in utensils. But there are others that just serve as part of the decor and perform a useful function. Such items for drying can be made of any size.

Stainless

A rare hostess will choose something short-lived for her kitchen. The same applies to dryers. The best item that is built into the kitchen module or simply serves as an interior decoration that is beneficial is a dryer made of stainless alloys.

The cheapest of the dryers are enameled. But they are short-lived. Enamel quickly breaks off, and rust appears on the chips and various pathogenic organisms accumulate. And such dryers are mostly limited in size. Their width always remains the same and is equal to forty-five centimeters, ninety and one hundred centimeters. Such dryers should be placed in places where they will be treated as carefully as possible or built into a cabinet.

Another thing is chrome dish drying. They are beautiful. And they are wear-resistant, resistant to various mechanical damage. Serve for a long time. They have trays of moisture from plates and cups. Pallets are usually made of transparent plastic. Although in some models the pallet is not included in the kit and it needs to be purchased. Such items are expensive in price.. They can be either built-in or stand-alone on a special sink tray designed for dryers.

In a drawer

The sizes for these types of items for drying dishes are incredible. From the smallest thirty-centimeter to the largest - meter. Such cumbersome dimensions in width are explained by the fact that the thick bars of the gratings, where plates, cups are inserted, have the ability to withstand the large amount of dishes and the weight that it will give.

Unfortunately, such stainless dryers do not have their own tray.

It will be interesting for you:

Corner

In addition to non-integrated dryers, there are also built-in dryers. They differ in that the dishes and cups are hidden from prying eyes. And the embedded species themselves are divided into several types of dryers. Each type is called because of the place and the functions that the kitchen module performs.

Thus, there are standard dryers. Which are located inside the hinged module directly above the sink where the dishes are washed. Such dryers are not always convenient. Firstly, if the housewife is small in stature, then she can hardly reach the very top where the cups are. To substitute a chair or ask her husband to constantly help put the cups in place is also absenteeism. And if a person is tall, then he will constantly bury his head in this cabinet when washing dishes.

Minimalist style kitchen

Usually, saucers from thirty to fifty (this is the maximum) centimeters are usually placed in this cabinet. It usually comes with fasteners, a pallet. Such dryers are most often two-level.

One upper section is installed for drying the cups, and the other, lower, for drying the plates.

The pallet is made of high-quality non-breaking plastic. He is also not able to accumulate various bactericidal microorganisms. The only thing he needs is a weekly departure. Rinse in running water or wipe with a cloth soaked in soapy water, and then you can walk with an ordinary damp cloth so as not to leave marks and make it look clean, as if just bought.

For different types of dishes

This type of item for drying dishes is ergonomic.

It allows you to use the free corner of the kitchen room, especially in the "Khrushchev", where it is difficult to have free space. It helps to divide the room and place all the necessary elements in it, create a cozy atmosphere in a small kitchenette.

For housewives with a short stature, dryers built into the lower floor cabinet are suitable. Thus, the shelf for dishes will always be at hand, you will not need to climb somewhere up. Better yet, if this cabinet is pull-out.

Compact and easy to use

Having dealt with the corner dryers, let's move on to another look that housewives will also like very much. These are dishes for drying dishes, which are hidden in the drawers of kitchen modules. What are their advantages and disadvantages?

Retractable

Such items of kitchen furniture are very convenient and comfortable to use. Firstly, no one will see what kind of dishes you have in the house, and accordingly there will be no unnecessary questions if you are not a lover or a lover of telling and showing everyone your good.

Secondly, comfort for housewives with short stature or for future mother assistants. Girls can easily wash the dishes and hide them in a drawer, so as not to reach up and not expose the high chair.

Can be placed both in the cabinet and at hand, near the sink

In this type of dryer, manufacturers provide everything. Fastening the facade, installing a pallet - everything was done specifically to help housewives. They glide easily on special retractable runners. They easily roll out and roll back. Provide full access to utensils. They have the same sections as standard dryers for cups and plates.

Now also departments for spoons, ladles and other cutlery have been built into this type of dryer.

Take care of such things. It is necessary to lubricate the runners with special oil annually so that they do not creak. Despite the fact that the material is durable material and wear-resistant, stainless, proper care is necessary. You can do this yourself by looking for additional information on the Internet or by asking the company where you purchased this type of dryer. Or call a special master at home, who will carry out preventive work with this item.

Choosing retractable saucers, you choose convenience for yourself first of all and for all families.

All dishes will be hidden in a single place. You will not need to look for her in case of unexpected arrival of guests.

Having examined all types of utensils, let's move on to the last part of our article more carefully. Namely, what kind of dryer to purchase - from two levels or single-level.

Option for a large number of dishes

Two-level

A two-tier saucer a saucer is the best choice for housewives. You can put plates, cups, spoons in it. When buying such a saucer, the main thing is to look at how well it is made, from what material. For mounted dryers, a metal alloy is usually used with an enamel coating or with the application of an anticorrosive substance. Puddle bowls with a thick rod will better support the weight, the number of plates and cups laid on it, in comparison with shaky thin bars.

When buying a two-level saucer, you need to pay attention to the distance between the first and second levels. Since with a small distance, large plates you simply can not fit in the departments specially created for them.

For a shelf without a door

It is desirable that the utensil was made of thick stainless rods. Then the long service life of such a thing and its strength are provided to you.

Also, saucers of this type can be built-in. They fit easily into corner kitchen modules, front cabinets, drawers. They are much better than simple ones with one level for drying dishes. Since they allow you to accommodate a large number of different dishes.

This lighting serves as a decoration for the kitchen

So, when choosing a cookware, any housewife should pay attention primarily to:

  • Saucer pan sizes. Since it depends on how many items of kitchen utensils fit into it. And also in what cabinet it will fit. You can’t buy a saucer larger or smaller than the cupboard that you have.
  • Acquire such a thing only from well-known companies. This will reduce the cost of buying an unexpectedly broken low-quality saucer, purchased from an unknown or first-appeared and yet unproven company.
  • Pay attention to what this dish is made of. Chrome, enamelled or even plain steel, which may rust next year. The latter kind is certainly not worth buying. And you determine the chrome alloy by its solid appearance and gloss.

Unusual but practical

  • When buying a saucer, you need to look at the size and thickness of the rods. Depends on them what weight this item will support.
  • You must immediately pay attention to the presence of a pallet. And if it is not included, then it is better to buy it. The pallet is better to buy the metal chromeplated. Unlike plastic, it will last longer. Of course, for saucers that will serve as part of the decor and stand on the sink, the fact that it will be without a pallet will not lead to anything terrible. Since all the water will drain down into the sink. But, if you buy a built-in utensil, then you can’t do without a pallet. Otherwise, the remaining moisture on the dishes will fall on the cabinet wood and deform its surface.

Of course, choose which dishwasher you buy business for an amateur.

But it is important to remember that for built-in utensils, good ventilation must be introduced into the kitchen module.

In extreme cases, drill holes in the cabinet walls. This way mold and bad smell will not bother you. In this case, external saucers that are installed on the wall or on the sink will be the best option. Since mold does not accumulate, water either falls onto the drain pan or goes directly to the sink. No smell will spread. Because the saucer is open and the dishes literally instantly dry out.



The disadvantages of external saucers include inconvenience to use. They can fall on the sink if they are accidentally touched by any large object or pan. And the wall can also be damaged. In addition, all the dishes are in plain sight, and if there are flies, insects or cats at home, this will lead to unsanitary conditions.

The advantages of retractable saucers - invisibility. They are located in a cabinet that slides in. Thus, it does not interfere with either the housewife or other relatives. It is also hidden from pets and insects.

Guided by these pluses and minuses, you can now choose one of all the existing types of saucers that we have analyzed in this article.

PHOTO GALLERY (more than 115 photos)

There are many varieties of dryers in the closet. Someone loves small, someone angular. Each has a different approach to the choice of material. But everyone has one goal - to be beautiful, convenient and practical. We have put together everything you need to know about the dryers in the closet. After reviewing the information, please leave your comments with reasoning in the comments.They will be useful to other readers. Your opinion is very important to us. Thank you for your participation. We appreciate your every feedback and time spent.