Repairs

Ceiling Light Panels: Features and Benefits

Have a desire to add a twist to the interior? Then you should give preference to new technologies. Undoubtedly, a ceiling with light panels will be a winning option. Thanks to this solution, it is possible to completely abandon traditional lighting. Outdated technologies are gradually becoming obsolete; they are being replaced by devices with unsurpassed design and reliable quality. But the real popularity, which significantly increased consumer demand, they deserve due to energy efficiency. Currently, light panels are widely used for decoration of commercial and educational institutions, industrial buildings. Less commonly, such lighting is installed in residential premises. The only thing where the panels cannot be used is in the open space, that is, on the street.

Variety

The first criterion by which light panels differ is shape. Manufacturers distinguish three standards: rectangular, square and round. But this does not mean at all that it is impossible to acquire something unusual. By individual order, the plant will produce light panels on the ceiling of the most unpredictable forms.

The second criterion is the type of installation. Currently, the buyer is offered overhead, built-in and hanging options. The mounting method is selected depending on the ceiling finish. For example, built-in panels are optimally suited for drywall constructions, however, suspended panels can also be used if desired, if the room height allows.

The third criterion is dimensions. Square panels are available with a side of 30 cm. Rectangular panels are presented in two options: 120 × 30 cm and 60 × 30 cm. But the diameter of the round can vary from 12 to 60 cm. As for the thickness, it does not exceed 15 mm. This makes it possible to install panels in any room.

And finally, the last criterion is the variety of shades of glow and power.

Device

Light panels on the ceiling are assembled from the following elements:

  • Housing made of aluminum. The radiator functions are assigned to it. It is important to consider that it is the case that significantly reduces the risk of fire and heat.
  • LED Strip Light. Used as a lighting element. It is mounted around the perimeter of the housing.
  • Prism glass. Thanks to him, the light is refracted, perpendicular to the earth.
  • Driver. It is used to convert voltage, that is, incoming 220 to 40 V.
  • Glass with a frosted surface. Designed to scatter light. As you know, LED strips emit too bright a glow. This can lead to serious discomfort. In order to avoid unpleasant emotions, manufacturers use frosted glass.
  • Substrate. It is applied only in white. She acts as a reflector.
  • Clamps. Designed for mounting light panels during installation.

Indisputable advantages

These lighting devices have become popular, thanks to a wide range of advantages. We list the main ones:

  • A wide selection of shapes and shades of glow.
  • Light weight panel design.
  • Simple disassembly and installation.
  • Light panels on the ceiling are mounted in three ways.
  • Reliability and durability (up to 100 thousand hours of operation).
  • Environmental friendliness (there are no mercury elements).
  • Panels are not afraid of temperature changes. The permissible range is from -20 ° to + 40 ° C.
  • Comfort for the human eye, as there is no flicker.
  • Significant energy savings. Compared to conventional bulbs, the efficiency of light panels is 10 times greater.
  • Not afraid of power surges.
  • The small thickness allows you to install items in any room.
  • Quiet operation, significantly increasing the comfort of use.
  • Simple maintenance. If the panel fails, it will take several minutes to replace it.
  • Daylight. The panels emit a pleasant soft light.
  • Ease of care. If dust has accumulated on the surface, it is easy to remove with a damp cloth.

What is the disadvantage of light panels?

It is important for those customers who decide to purchase light panels to know not only the advantages, but also their disadvantages. In comparison with the advantages, there are not so many of them. It is worth highlighting the two most significant. The first is the ability of LEDs to degrade. This leads to the fact that over time, the devices lose power, the emitted light dims significantly.

The second drawback is more significant. This is a lack of resistance to moisture. For this reason, in no case can you install light panels on the ceiling in the bathroom, sauna and other rooms where the humidity level is significantly increased.

Original Design Ideas

Surprisingly, modern designers for interior decoration can apply the most unexpected ideas. In order to achieve originality, they break down all stereotypes. If you approach the matter with standard thinking, then you can use light panels on the ceiling. However, to get a bright accent, it is recommended to duplicate them on the walls. Most often, this technique helps not only fill the room with natural light, but also draw attention to certain objects. Also, this design is suitable for zoning space.

These panels are perfectly combined with other lighting objects. And this makes it possible to fantasize without limits. If you consider that custom-made light panels of any shape, then thanks to them you can create extraordinary compositions.

Subtleties of installation

The most popular option is recessed light panels. For the ceiling in an apartment or in a private house, this method of fastening can be considered optimal. Installation of lighting devices is carried out on plasterboard finish or Armstrong construction. A detailed examination of the latter option makes it clear how easy the installation is. It is enough to install light panels instead of plates. The only thing you need to pay attention to is the size.

Using this type of lighting on plasterboard ceiling structures will require a little more time. Masters will have to cut holes of the required size, and then fix the panels with special clamps.

Overhead lights are rarely found in interiors. This method of attachment is used only when it is not possible to apply other options. In order to carry out installation, you will need to purchase an additional set of fasteners. In this way, you can install the light panels on the suspended ceiling, although it will be quite difficult.

The most original installation method is mounted. With this fastening, lighting devices perform not only the main tasks, but also act as decor. Installation is carried out using special cables.

Price of ceiling light panels

Consumer demand rises significantly after buyers learn about all the advantages of light panels. And it is quite natural that many of them begin to be interested in value. The price is formed on the basis of certain criteria. First of all, this is the size of the panels and additional options, for example, different shades of glow. The simplest option will cost about 2000-3000 rubles. The final cost will depend on the number of elements that are mounted on the ceiling, and the method of attachment. Do not forget about the wages of craftsmen.

But in any case, these lighting devices can not be attributed to expensive options, since it is necessary to take into account high energy efficiency and a long service life, due to which the cost is fully paid off.

To summarize

Light panels appeared on sale not so long ago, but they have already gained popularity. Such high demand is explained by excellent properties, simple installation and easy maintenance. Currently, these lighting devices are still widely used in non-residential premises, but very soon their scope will expand significantly.

Features

Light panels are compact in size and modern in design. For lighting, LED elements are used. Light panels consist of several main components connected in a convenient and practical design, which provides ease of use as well as ease of maintenance.

Light stripes consist of several basic elements, which include:

  • LED light source. The number of lamps depends on the size of the panel and the required light intensity,
  • the body of the product consists of a translucent polymer that provides characteristic lighting. On the back wall there is a reflective film that enhances and normalizes the glow, if there is a malfunction of one of the diodes,
  • auxiliary electronics (transformer, stabilizer and others).

Advantages and disadvantages

The advantages of light panels on the ceiling include:

  • attractive design, featuring a wide selection of shapes and colors,
  • you can order a panel of a suitable style and size, since their manufacture is based on the use of ready-made LED lamps and has no special difficulties,
  • relatively small dimensions, when compared with equivalent lighting fixtures, their thickness does not exceed 14 mm, which significantly saves space without lowering the ceilings,
  • simple installation of the finished product makes it possible to install such panels even for people who are not versed in electricity,
  • such products can create zoned lighting, highlighting the desired area. This option is often used for large rooms, studio apartments and rooms in which several people cohabit.
  • pleasant lighting is provided by the ability to control the intensity of the panel through control drivers, it is also possible to change the color of lighting from warm yellow to colder white

  • high ratio of consumed and radiated energy - about 110 times thanks to the use of LED technology,
  • long service life
  • LEDs are resistant to temperature changes,
  • instant exit to the set lighting intensity,
  • silent operation of light sources - LEDs,
  • low temperature of the lamps
  • a safe emission spectrum of LEDs, which determines their widespread use without the likelihood of harm to people, animals and plants,
  • made from environmentally friendly components without the use of toxic substances.

The disadvantages of LED lighting strips are their high cost, which is directly related to the price of LED lamps. In addition, products are only available in a modern design, which may not be appropriate in some interior styles, for example, in classics.

Light panels are manufactured for specific operational needs, which determines their structural features both in the external design and in terms of the filling of products.

In shape

Manufacturers offer a choice of different options for the shapes and colors of the cases. The most common options include:

  • square (with an average size of 20-60 cm),
  • round (diameter up to 24 cm),
  • rectangular.

Manufacturers can make fixtures of the desired shape, size and color to order.

Advantages of LED Based Panels

The advantages of these lighting devices are mass:

  1. Insignificant amount of energy consumed. If only light panels are installed in a house or apartment, then it will be possible to pay half the price for lighting,
  2. These lighting devices are a real find for designers. The panels allow them to realize the most daring creative projects and any "light" fantasies. As a result, you can achieve an impressive lighting effect,
  3. Such lighting fixtures are very easy to install, so they are increasingly equipping suspended ceiling systems. They already pushed into the background luminescent lighting devices,
  4. These products make it possible to focus on aesthetically attractive areas or things, allow you to experiment with shadows. An example is not very attractive angles that perfectly obscure such panels,
  5. Light panels do not need to change bulbs and make any more tedious manipulations with them. They are easy to place even in the most inaccessible areas of the room.

Design features of lighting products

The design of the panels was created in such a way that it was possible to install them as simply as possible. At the same time, consumers are pleasantly surprised by the reliability and strength of the fastening devices, which are usually bundled with these products. If the buyer did not find them in the purchased panels, then do not be upset. Fasteners for them are sold in any specialized store.

If desired, the light panels from the site http://vvg.kiev.ua/g10886822-svetodiodnaya-panel-led can easily be attached to the ceiling made of concrete thanks to their suspensions. These suspensions are also able to clearly adjust the height of the mounted panels.

Particular attention is drawn to the panel frame, which is easy to install on the same level with the suspended ceiling system.

Types of light panel devices

At this time, manufacturers offer square, rectangular and round products of various parameters. But as for the thickness of the panels, then they all have about the same and is no more than 14 millimeters.

Do not be afraid to install LED panels on low ceiling surfaces. The fact is that the panels have a matte diffusing lighting, which visually “raises” the ceiling structures and in this way eliminates the discomfort that may appear in a person in a room with low ceilings.

Light panels are quite thin, so they are easy to fix in any position necessary for a person. They can be attached to the wall, laid flat or hung on the ceiling system and the light of spotlights, which are also placed on the ceiling, is connected to their light. The panels can even be cut into a surface made of drywall.

The consumer should know that different types of light panels have their own degree of power, as well as the tone of the glow.

These products today are the most cutting-edge developments available to the LED industry. Specialists call the highlight of LED panels an exclusive and unique style. However, many business owners prefer these lamps to any other lighting devices, not only because of their original and incomparable design. They are impressed by their energy-saving characteristics, which are able to significantly reduce the cost of electricity.

Design

It is represented by a metal (aluminum) or plastic case and acrylic sheet.In the sheet, holes are made for LED elements. In this case, the brightness of the lamp depends on the number of bulbs. Sheet thickness does not exceed 8 mm. On the front side of the acrylic plate, many small channels in the horizontal and vertical directions that scatter light are embossed. A reflector is installed at the back of the sheet for even distribution of light fluxes.

The set of light panels on the ceilings includes voltage stabilizers in the form of additional power sources. Their performance is not violated in the range from 110 to 240 watts.

Ceiling light panels mounted as part of Armstrong construction

The installation of devices is mostly carried out on suspended structures made of drywall. But there are models that can be built into stretch ceilings or ordinary concrete substrates.

Panels and Stretch Ceilings

Modern designers are increasingly including panels in the interior, embedding them in tension structures, due to the practicality and convenience of products.

Installing an LED panel for stretch ceilings is as easy as installing ordinary spotlights, despite its large dimensions. The created smooth surface from the canvas and the device looks original and harmonious.

The devices fit well in low rooms thanks to diffusers, which are part of the design of the device, and evenly distribute light fluxes, without causing discomfort to the eyes.

The panel on the ceiling with LEDs is the perfect solution for any interior. Combining products of different shapes, power and colors, it will turn out to radically transform the room.

By type of installation

Light panels are manufactured with various types of fixtures, The main types include:

  • recessedthat involve placement inside a particular structure, for example, drywall, wood or another box,
  • waybills the options are attached directly to the surface of the ceiling, wall or other plane in the same way as a conventional lamp for self-tapping screws or other fixing means,
  • outboard - from the ceiling fasteners, a suspension is carried out by cables, which allows you to create a clearly defined light zone, for example, you can highlight a dining table in the kitchen.

In the direction of light

The radiating elements in the light panels can be mounted on a movable base, which allows you to adjust the direction of lighting. Depending on the direction of light, the products are divided into two types:

  • with a constant direction of the lamps,
  • with interchangeable lighting vector.

By the presence of a scattering coating

The panels may or may not have a translucent coating that defines a specific specificity of the luminous flux. The following types of panels are available:

  • with a diffusing element (shade), such lighting creates a pleasant and comfortable atmosphere, great for lighting recreation areas, eating and other places with similar specifics,
  • without it, direct light is more intense and can provide the necessary lighting when performing small and scrupulous actions, for example, in a jewelry or other store when considering small-sized goods, when reading books, working with microelectronics and other options.

By the availability of controllers

The light panel can be equipped with a special device that regulates the intensity of lighting, and in some cases, its color, in this case, all products are divided into the following types:

  • with stable lighting
  • with regulation of light intensity,
  • with regulation of intensity and color of lighting.

Use in the interior

When deciding on the purchase of light panels, you need to decide for what purposes they will be used: additional or main lighting. This factor affects their placement in the room. The mounting location, in turn, determines the format of the product. So, light panels can be installed on such surfaces:

In the case of a wall, ceiling or piers, the dimensions of the panel correspond to the dimensions of these planes. On cornices and columns you need to install products of the appropriate width, otherwise they will not fit into the interior, and their fastening will not be completely reliable and convenient.

Creating the main lighting with the help of light panels, products can be placed in different sequences relative to each other. For example, the arrangement one after the other, that is, lines with certain intervals, obliquely from each other - in a checkerboard pattern. You can combine panels of various shapes, for example, round and rectangular options to highlight different areas in the room.

Options for suspended and suspended ceilings

The versatility of the products, their compact size and ease of use allow the use of light panels in conjunction with other elements of decorative decoration.

Like light panels, suspended ceilings are becoming increasingly popular due to the excellent appearance combined with ease of installation and operation, which determines their frequent sharing. The light panel can be installed under the cover of a fabric suspended ceiling, although more often the lamp is installed in the cut-out niche of both knitted and film stretch ceilings. The low operating temperature of the device provides complete safety when closely located with PVC or fabric surface, does not spoil the appearance of the coating.

A wide range of designs for both light panels and stretch ceilings makes it possible to create interiors for every taste without the need for complex expensive design repairs.

LED light panels displace fluorescent lamps in the presence of an Armstrong suspended ceiling, since the latter are inferior to the operational and aesthetic properties of diode devices. Installation of products is reduced to the choice of placing illuminators relative to the entire area of ​​the room, and replacing the panels of the suspended ceiling with lighting. If the dimensions of the light panels are smaller than the cells, they can be embedded in the cut-through standard panels, which also does not cause much difficulty.

See the video below for the installation of a ceiling box with backlighting and LED panels.

Positive features and disadvantages

According to operational characteristics, the LED ceiling module is customarily compared with incandescent lamps. In many respects, the LED panel significantly exceeds them:

  • Economical power consumption.
  • High light transmittance (above 95%).
  • The service life exceeds the vital indicators of incandescent lamps by 50 times.
  • The LED panel mounts quickly and easily.
  • The LED lamp instantly turns on and off, as there is no effect of inertia (smooth attenuation).
  • When adjusting the brightness of the glow with conventional resistors, the light flux does not change the spectral characteristics (does not fade and does not turn yellow).
  • High color rendering index, due to which the LED ceiling lamp perfectly illuminates the room with special requirements for the light perception of interior items (museums, art galleries).
  • The LED panel provides ample design opportunities for creating decorative compositions on the ceiling.

Important ! Thanks to its high performance, the LED panel can be used to fully illuminate a large room. The area of ​​the living room in the apartment can be illuminated by one powerful (60 W) LED panel.

Among the shortcomings, the high cost of LED panels is noted. But progress does not stand still, and every year the technology of their production is cheaper. Therefore, in the near future, this type of lighting may become quite a budget option.

In addition, the impression of the small size of the lamp itself is spoiled by the presence of a current converter (power supply for tapes and a driver for panel modules). In addition to the fact that its installation creates certain difficulties when installing the entire device, it is “moody” to operating conditions and often fails.

Due to the fact that the LED ceiling lamp has the same design, this narrows the range of interiors where it will look.

Varieties of LED panels

LED modules differ in the following ways:

  • In shape. Panel LED lights under a suspended ceiling are produced in a square, rectangular and round casing.
  • The height of the body. The thickness of the lamp does not exceed 1.5 cm.
  • According to the installation method. There are hinged and built-in modules.
  • By power consumption. This indicator depends on the type and number of LEDs used in one module, and ranges from 6 to 60 watts.

Most LED panels are equipped with opal diffusers.

Installation of modular LED devices

Since the panel has a shape that corresponds to the cell size of the Armstrong suspension structure, installation in the ceiling of this type will be the easiest. To do this, when assembling the frame, make wiring for lighting, and when laying the panels in the right place, install an LED module on the profile shelves.

Armstrong ceiling installation diagram

For drywall ceilings and tensile structures, two mounting options are provided:

  • LED panel for cables,
  • LED panel on the corners to the carrier panel.

Important ! The success of the installation using these technologies depends on the accuracy of the layout.

Installation on cables

To install the ceiling LED lamp in a suspended way, first mark the location of the lamp on the ceiling and drill holes for the dowels to which the cables will be attached. Each suspension is mounted on three dowels.

After that, the projections of the attachment points of the suspensions are transferred to the walls, so that after filing to determine the place for holes on it.

After the ceiling is hemmed, holes are cut in the marked place and suspended cables are passed through them.

On the lamp housing there are special brackets for attaching suspensions. Suspensions are launched in them and fixed with a clamp at the desired height.

Corner Installation

To install the LED lamp in an integrated way, you will have to tinker with the markup for longer.

The meaning of this technology is that a ceiling lamp is located on the same level as the ceiling surface.

First determine the location of the future surface of the ceiling. For convenience, use a thread stretched between opposite walls.

To fix the modular LED lamp to the base, use special corners. The side of the corner to which the device body is attached has a large length with many holes (like a U-shaped suspension for drywall), which allows you to adjust the height of the device.

An overview of the characteristics and installation options of the modular LED lamp can be seen in the video:

Hem the ceiling after installing the LED panel.

Installation on suspended ceilings

The material of the tensile structure makes the installation of panels somewhat more difficult than in other mounted systems.

To perform the installation on suspensions, in the same way, first suspensions are fixed to the base. For the driver, it is necessary to provide for mounting in a remote place. This will provide access to the device. The projection of the attachment points is transferred to the walls and the tension web is installed.

On the canvas mark the exit points of the suspensions and strengthen the film with O-rings.

After that, you can cut holes and attach the panel to the suspensions.

If you want to make the design so that the panel is in the same plane with the canvas, first note the position of the surface of the future ceiling, and in accordance with it, mount and connect the lighting device.

After that, order the canvas with the appropriate cutout. Further installation of the PVC stretch film should be done by professionals, since it will require high qualification to assemble the strapping from the profiles and the correct tension of such a fabric.

The LED panel is a meaningful and pragmatic approach to lighting planning.

Can LED ceiling panels be used for suspended ceilings? Features of the constructive solution of these products. Advantages and disadvantages of LED ceiling units. Classification and equipment. Features of the installation. Recommendations for choosing a product.

LED ceiling panels are ideal for suspended ceilings, or rather for installation in this type of ceiling coating.

Pros and cons of LED panels

LED panels for suspended ceilings are gaining unprecedented popularity. All this thanks to a large list of advantages:

  • The unit consumes a minimum of electricity, which makes it a leader in terms of cost among lighting fixtures.
  • The longevity of the lamp is another indisputable plus in its favor. According to the manufacturers, the unit is able to function for 50,000 hours.
  • Thanks to the built-in transformer, the device emits a uniform non-flickering light flux, which affects our vision in the best way.
  • The device is able to maintain balance, that is, if one of the diodes becomes inoperative, the intensity and uniformity of lighting will not be affected at all.
  • Simple and quick installation allows you to perform it yourself.
  • The unit can be used in any room, since there is no need for frequent change of bulbs.
  • LED panels can emit a different color light flux. Thanks to this, it is easy to perform functional zoning of the room.
  • Panels can be built-in and hinged. Since the height of the case does not exceed 8-25 mm, for the built-in unit, a large gap between the stretch ceiling and the base surface is not required, and the mounted device does not reduce the height of the room.
  • The beauty and practicality of the product is its important advantage.

The only drawback is the low moisture resistance of the device, so it can not be mounted in rooms with a high level of humidity.

Varieties of LED panels

LED panels under a stretch ceiling are made round, square and rectangular. On request, you can make a device of a different, unconventional form, but its price will be slightly higher than that of serial units.

Typically, the height of the panel is only 1.4 cm. The device uses a matte diffuser, which allows you to visually increase the height of the room. As you already understood, the unit can be built-in and mounted.

In addition, these products are classified by the level of power consumption, as well as by the color of the emitted light flux. The lamp power is directly related to the number of diodes located within the light plane of the unit. This indicator can be in the range from 10 to 100 diodes.

Instrument configuration and power features

When buying a device, in addition to the unit itself, you can buy:

  • Power supply with stabilizer
  • Ceiling Mount Fasteners

Typically, the power supply is designed for a power range from 110 to 240 watts. It has devices that protect the unit from short circuit. When buying a lamp, you can count on a guarantee that applies not only to the unit itself, but also to the power supply.

Modern LED Ceiling Panels

Modern high-quality LED panels on the ceiling can be of various shapes.

Namely, such as:

In addition, it is possible to order the manufacture of lamps and custom shapes, it all depends on the wishes of the owner of the apartment.The thickness of all LED lamps is 14 centimeters, but the design can be chosen absolutely any.

This type of lighting can have different power and shades, so it is possible to complete the interior in any style.

If the ceilings are made of drywall, then such a backlight can be mounted directly into it. In addition, there may be overhead and suspension structures.

How to choose lamps in PVC panels on the ceiling

The ceiling takes on a unique shape with a well-chosen lighting option. Lamps mounted in PVC panels are considered a universal lighting tool that looks great on all colors of the ceiling, regardless of the form in which they are made. Such lamps allow you to correctly set the lighting, and also, if necessary, are quite amenable to adjustment.

Modern lamps in PVC panels for the ceiling are characterized by the fact that they:

  • Inexpensive
  • Quick to install
  • Help create a unique finish.

Important! When choosing a lamp mounted in a PVC panel, you need to consider the stylistic features of the room.

With this type of lighting, it is possible to highlight exactly the area that is needed.

What are spotlights for plastic panel ceilings?

Spotlights over the past few years have become very popular, and in terms of popularity are equal to traditional lighting methods.

Spotlights for plastic panels allow you to create:

  • Unique cosiness
  • Unique design,
  • Excellent level of lighting.

Spotlights for plastic panels are mounted not only to provide basic lighting, but also as a backlight. This type of fixtures allows you to adapt not only to standard traditional lighting, but there is also the opportunity to fully translate all your design ideas into reality. In small rooms, spot lighting is used as the main one, and at the same time their installation is carried out directly in drywall or plastic panels. Such lighting is mainly inherent in the bath, kitchen and hallway.

In order to visually expand the space of a room or zoning a room, in many cases not only a standard chandelier is used, but also a certain number of spotlights. With the help of a spotlight, it is possible to give the ceiling multifunctionality and unique beauty.

High Quality LED Recessed Ceiling Panels

High quality ceiling-mounted panels have several different types of lamps.

In particular, such as:

  • Incandescent
  • LED light
  • Fluorescent
  • Halogen.

A win-win option is the use of a case with a darkening on top of the spray so that the light beam does not enter the ceiling space, but only spreads around the room. The halogen type of spot lighting is considered the most optimal option for creating a unique level of lighting in any room. They are characterized by durability, ease of installation and reasonable cost.

LED luminaires have excellent characteristics, because they are quite durable, eliminate the overheating of plastic panels, and also help save energy.

How to mount the LED panel to the ceiling

The LED panel has superior features and modern design. The LED panel is characterized in that it is possible to provide soft light in the room, which will be evenly distributed.

LED panels have many different advantages, in particular such as:

  • Energy saving
  • Good luminous flux
  • Ease of installation.

The fastening of LED panels depends on the features of the ceiling structure and the LED panel itself. If LED panels need to be fixed to the base ceiling structure, then in this case such panels are mounted by fixing the lamp directly to the ceiling using special cable suspensions, which makes it possible to adjust the height.

LED panels can be mounted in a suspended ceiling. When performing installation of a similar design, it is necessary that the front part of the lamp completely coincides with the plane of the suspended ceiling. When assembling a false ceiling, it is imperative to consider the attachment points. In the places of fastening you need to install special metal profiles that will be required to perform the installation of the backlight.

It is much more difficult to install the LED backlight in the suspended ceiling, because it must be mounted using special cables. But it can also be used as recessed fixtures.

When installing a stretch ceiling, the backlight is pre-mounted and only after that the canvas is equipped.

Stylish light panels in the interior (video)

Incandescent lamps are widely used for spotlights, and allow you to create the required level of lighting in the room, regardless of its size. High-quality fixtures and light panels on the ceiling are characterized by excellent performance, a variety of options, sophisticated style.

LEDs have gained incredible popularity in recent years. Not a single modern repair can do without the use of this type of lighting in rooms of any purpose. The choice of assortment allows you to embody bold and innovative solutions, which gives the interior personality.

An important role in the appreciation of LEDs is played by their economical energy consumption. The issue of rational use of resources is as relevant as ever. Therefore, each new product made using innovative technologies attracts great interest. No exception steel and LED panels.

Installation options for LED panels

Panel mounting technology depends on the design of the ceiling surface. The process itself is not complicated, however, has its own nuances. Several mounting methods are used: hanging, laid on, built-in.

Features of installation on a conventional ceiling

LED backlighting can be fixed both on a concrete surface and on a wooden one. The main fasteners are special cable suspensions, with which you can adjust the height of the lamp. Usually manufacturers equip LED panels with such suspensions, but in the absence of fasteners, they can be easily purchased in stores.

One of the time-consuming steps during installation is considered to be marking on the ceiling. Not only does it require accuracy, so the work is complicated by the conditions (the whole process is carried out from a stepladder or ladder). The attached instruction will facilitate the task, where everything is described step by step.

At the designated points in the ceiling surface, holes are made for the fasteners of the cable suspension, which is subsequently fixed with screws on plastic dowels. Installation work is being completed by installing panels on the cables. They are passed through the hinges of the brackets welded to the body and fixed with a special clamp.

If the cable option is not suitable, you can suspend the lamp using metal mounting angles. On each panel, four fasteners are fixed to the ceiling surface at marked points and four corners to the back of the case. It remains only to connect the metal elements to each other with screws.